Samsung AU8000 55" UHD 4K HDR Hospitality TV - Manual (Page 22)

Network Security Protocols
The TV only supports the following wireless network security protocols:
• Authentication Modes: WEP, WPAPSK, WPA2PSK
• Encryption Types: WEP, TKIP, AES
In compliance with the Wi-Fi certification specifications, Samsung TVs do not support WEP or TKIP security encryption
in networks running in the 802.11n mode.
If the wireless access point supports WPS (Wi-Fi Protected Setup), you can connect the TV to your network using PBC
(Push Button Configuration) or a PIN (Personal Identification Number). WPS automatically configures the SSID and
WPA key settings.
Your Smart TV cannot connect to uncertified wireless access point.
Establishing a wired Internet connection
There are three main ways to connect the TV to your network using cable, depending on your network setup. They are
illustrated below:
The Modem Port on the Wall
Modem Cable (Not Supplied) LAN Cable (Not Supplied)
TV Rear Panel
External Modem
(ADSL / VDSL / Cable TV)
TV Rear Panel The Modem Port on the Wall
Modem Cable
(Not Supplied)
LAN Cable
(Not Supplied)
LAN Cable
(Not Supplied)
External Modem
(ADSL / VDSL / Cable TV)
IP access point that
has a DHCP Server
TV Rear Panel The LAN Port on the Wall
LAN Cable (Not Supplied)
• The TV will not be able to connect to the Internet if your network speed is below 10 Mbps.
• To connect a LAN cable, use a CAT 7 (*STP type) cable for the connection. (100/10 Mbps)
* Shielded Twisted Pair
English - 22