Samsung C49RG9 49" 32:9 120 Hz Curved FreeSync HDR VA Gaming Monitor - Manual (Page 36)

36
Color
Adjust the tint of the screen.
―
This menu is not available when Picture Mode is set to Cinema or Dynamic Contrast mode.
―
This menu is not available when Eye Saver Mode is enabled.
―
This menu is not available when PBP is enabled.
• Red : Adjust the red saturation level. Values closer to 100 mean greater intensity for the color.
• Green : Adjust the green saturation level. Values closer to 100 mean greater intensity for the color.
• Blue : Adjust the blue saturation level. Values closer to 100 mean greater intensity for the color.
• Color Tone : Select a color tone that best suits your viewing needs.
‒ Cool 2 : Set the color temperature to be cooler than Cool 1 .
‒ Cool 1 : Set the color temperature to be cooler than Normal mode.
‒ Normal : Display the standard color tone.
‒ Warm 1 : Set the color temperature to be warmer than Normal mode.
‒ Warm 2 : Set the color temperature to be warmer than Warm 1 .
‒ Custom : Customize the color tone.
―
When the external input is connected through HDMI/DP and PC/AV Mode is set to AV , Color Tone has four
color temperature settings ( Cool , Normal , Warm and Custom ).
• Gamma : Adjust the middle level of luminance.
‒ Mode1 / Mode2 / Mode3
HDMI Black Level
If a DVD player or set-top box is connected to the product via HDMI, image quality degradation (contrast/
color degradation, black level, etc.) may occur, depending on the connected source device. In such case,
HDMI Black Level can be used to adjust the image quality.
―
This function is only available in HDMI mode.
• Normal : Select this mode when there is no contrast ratio degradation.
• Low : Select this mode to reduce the black level and increase the white level when there is a contrast
ratio degradation.
―
HDMI Black Level may not be compatible with some source devices.
―
The HDMI Black Level feature is only activated at a certain AV resolution, such as 720P and 1080P.
―
This menu is not available when PBP is enabled.
Eye Saver Mode
Set to an optimum picture quality suitable for eye relaxation.
TÜV Rheinland “Low Blue Light Content” is a certification for products which meet requirements for
lower blue light levels. When
Eye Saver Mode is ' On ', the blue light that wavelength is around 400nm will
decrease, and it will provide an optimum picture quality suitable for eye relaxation. At the same time, the
blue light level is lower than in the default settings, and it was tested by TÜV Rheinland and certified as
it met the requirements of TÜV Rheinland “Low Blue Light Content” standards.