Samsung C49RG9 49" 32:9 120 Hz Curved FreeSync HDR VA Gaming Monitor - Manual (Page 12)

12
Changing Brightness, Contrast and Sharpness settings
You can adjust Brightness , Contrast or Sharpness by moving the JOG button up, if no OSD menu is
displayed.
Brightness
Contrast
Sharpness
100
―
The displayed image may differ depending on the model.
―
The default brightness can vary depending on the region.
Brightness
―
This menu is not available when Eye Saver Mode is enabled.
―
This menu is not available when Picture Mode is set to Dynamic Contrast mode.
Contrast
―
This menu is not available when Picture Mode is set to Cinema or Dynamic Contrast mode.
Sharpness
―
This menu is not available when Picture Mode is set to Cinema or Dynamic Contrast mode.
―
This menu is not available when PBP is enabled.
Changing Eye Saver Mode settings
You can adjust Eye Saver Mode by moving the JOG button down, if no OSD menu is displayed.
Eye Saver Mode : On
―
The displayed image may differ depending on the model.
Changing the Volume setting
You can adjust Volume by moving the JOG button left or right, if no OSD menu is displayed.
Volume 50
Mute
―
The displayed image may differ depending on the model.
―
If the audio quality of a connected input device is poor, the Auto Mute function on the product may mute the
sound or cause choppy audio when applying the headphones or speakers. Set the input volume for the input
device to at least 20% and control the volume using the volume control (JOG button LEFT/RIGHT) on the
product.
―
What is Auto Mute?
The function mutes the audio to improve sound effect when there is sound noise or when the input signal
is weak, usually due to a problem with the volume of an input device.
―
To activate the Mute function, access the Volume control screen, then use the JOG button to move the focus
down.
To deactivate the
Mute function, access the Volume control screen, then increase or decrease the Volume .