Pbp mode 28, Chapter 05, Pbp mode – Samsung ViewFinity UR59C 32" 4K Curved Monitor User Manual
Page 28
28
PBP
A detailed description of each function is provided. Refer to your product for details.
Chapter 05
―
The functions available may vary depending on the product model. The color and shape of parts may differ
from what is shown. Specifications are subject to change without notice to improve quality.
PBP Mode
Enable or disable the
PBP Mode
function.
The PBP (Picture by Picture) function separates the screen in half displaying output from two different
source devices simultaneously on the left and right sides of the screen.
―
The optimum resolution for the left and right sides of the screen is 1920 x 2160 (width x height).
―
PBP
mode is compatible with Windows 7, Windows 8, and Windows 10.
―
The
PBP
function may not be available depending on the specifications of the graphics card used. If the
screen is blank in
PBP
mode when the optimum resolution is selected, go to
Control Panel
→
Display
→
Screen Resolution
and click
Detect
on the PC. (Instructions are based on Windows 7.) If the screen is blank
when the resolution is set to the optimum resolution, change the resolution to 1280 x 1024.
―
The screen may flicker briefly or appear after a delay when you enable or disable the
PBP
function or when
you change the screen size with the
PBP
function activated.
This can typically arise when a PC and a monitor are connected to two or more input sources. It has nothing
to do with the performance of a monitor.
The issue is mainly caused when the video signals are delayed in transmission to the monitor depending on
the graphics card performance.
―
To maximize the picture quality and Sound can be normal output it is recommended to use a graphics card
or DVD that supports 4K (3840 x 2160 @ 60 Hz) resolution when connect
HDMI
port.
―
When the
PBP
function is enabled, the resolution will not be able to automatically switch to the optimum
resolution due to a compatibility issue between the graphics card and the Windows system.
Set
PBP Mode
to
Off
. Alternatively, restart the monitor, then set the resolution to the optimum setting
using the Windows interface.