Using direct power on, Fine-tuning the projector, Button on the remote control, then enter the – Epson 9300i User Manual
Page 74: Menu. 2. use the pointer button to highlight, Then choose, And press the, Menu, Advanced2, Direct power on, Enter
74
Fine-tuning the Projector
Using Direct Power On
You can set up the projector to turn on immediately once it is plugged
in (or receives power from a wall switch).
1. Press the
Menu
button on the remote control, then enter the
Advanced2
menu.
2. Use the
pointer button to highlight
Direct Power ON
, then
choose
ON
and press the
Enter
button to select it.
Make sure you do not unplug the projector to turn it off. You must
power off the projector as described on page 47 to allow it to cool
down, or you will damage the projector.
:
Video
Audio
Setting
User’s Logo
Advanced1
About
Reset All
Reset
Execute
[Menu]: Exit
[Menu]: Exit
[ ]: Enter
[ ]: Enter
[ ]: Select
[ ]: Select
Effect
Advanced2
BNC Sync Termination
ermination
ON
OFF
:
Projector ID
Network
: 1
COM Port
COM Port
:
Set
Set
RS-232C
USB
Auto Setup
ON
OFF
:
Direct Power ON
ON
OFF
: