GRAM FSI 401754 N/1 - Manual (Page 23)

EN
23
BEFORE CALLING YOUR AFTER SALES SERVICE
If your freezer is not working properly, it may be a minor problem, therefore check the
following, before calling an electrician to save time and money.
ERROR TYPE MEANING WHY WHAT TO DO
E01 Sensor warning
Call Service for assistance as
soon as possible.
E02 Sensor warning
Call Service for assistance as
soon as possible.
E03 Sensor warning
Call Service for assistance as
soon as possible.
E06 Sensor warning
Call Service for assistance as
soon as possible.
E07 Sensor warning
Call Service for assistance as
soon as possible.
E08 Low Voltage Warning
Power supply to the device
has dropped to below
170W.
-This is not a device failure,
this error helps to prevent
damages to the compressor.
-The voltage needs to be
increased back to required
levels
If this warning continues an
authorised technician needs to be
contacted.
E09
Freezer compartment
is not cold enough
Likely to occur after long
term power failure.
1. Set the freezer temperature
to a colder value or set
Super Freeze. This should
remove the error code once
the required temperature
has been reached. Keep
doors closed to improve time
taken to reach the correct
temperature.
2. Remove any products which
have thawed/defrosted during
this error. They can be used
within a short period of time.
3. Do not add any fresh
produce to the freezer
compartment until the correct
temperature has been
reached and the error is no
longer.
If this warning continues an
authorised technician needs to be
contacted.
What to do if your appliance does not operate;
Check that;
• There is no power,
• The general switch in your home is disconnected ,