GRAM FSI 401754 N/1 - Manual (Page 15)

EN
15
Door Open Alarm Function
If freezer door is opened more than 2 minutes, appliance sounds ‘beep beep’.
Temperature Settings
Freezer Temperature Settings
• The initial temperature value for the freezer setting indicator is -18°C.
• Press the set freezer button once (#4 on control panel diagram).
• When you first push this button, the last set value will blink on the screen.
•
Whenever you press this button, a lower temperature will be set (-16°C,
-18°C, -20°C, -22°C, -24°C, super freeze).
• When you push the set freezer button until the super freeze symbol (#3)
appears, and if you do not push any other button within 1 second, super
freeze will flash.
• If you continue to press it, it will restart from -16°C.
• The temperature value selected before super freeze mode or economy mode
is activated and will remain the same when the mode is over or cancelled.
The appliance continues to operate with this temperature value.
Recommended Temperature Values for Freezer
When to adjust
Inner
Temperature ( o C)
For minimum freezing capacity -16, -17
In normal usage -18, -19, -20, -21
For maximum freezing capacity. -22, -23, -24
Warnings about temperature adjustments
• Do not pass to another adjustment before completing an adjustment
• Temperature adjustments should be made according to the frequency of
door openings, the quantity of food kept inside the freezer and ambient
temperature of the place of your freezer.
• Your freezer should be operated up to 24 hours according to the ambient
temperature without interruption after being plugged in to be completely
cooled.
• Do not open doors of your freezer frequently and do not place much food
inside it in this period.
• A 5 minute delaying function is applied to prevent damage to the compressor