MIDEA Top Load Impeller - Manual (Page 6)

Installation Warnings and Precautions
WARNING
6
•
•
•
•
•
•
•
•
•
•
Position the appliance so that the power plug is easily accessible.
Failure to do so may result in electric shock or fire due to an electrical
short circuit.
•
Failure to follow all of the safety warnings in this guide may result in
property damage or injury to persons.
•
Safety
Instructions
Features
Operation
Requirements
Installation Instructions
Washer Use
Washer Care
Tro
ub
le
sh
oo
tin
g conditions. Failure to do so may result in serious leak damage.
temperatures below freezing or exposed to outdoor weather
Store and install the washer where it will not be exposed to
injuries.
and move the appliance. Failure to do so may result in bodily or other
The washer is heavy. Two or more people may be needed to install
vibration, noise or problems with the product.
that can support its weight. Failure to do so may result in abnormal
Do not install on carpet. Install the washer on a level and solid floor
service center.
If the power plug or power cord is damaged, contact your nearest
- Failing to do so may result in electric shock or fire.
- Unplug the power plug by holding the plug.
Do not pull the power cord when unplugging the power plug.
result in electric shock or fire.
power cord into the space behind the appliance, because this may
on the power cord, insert power cord between objects, or push the
Do not hook the power cord over a metal object. Place a heavy object
the power cord.
Do not pull or excessively bend the power cord. Do not twist or tie
shock fire.
power plug or loose wall socket, because this may result in electric
Plug the power plug into the wall socket firmly. Do not use a damaged
result in electric shock or fire.
the electric wires within the cable may be damaged and this may
- If you plug the power plug into the socket in the opposite direction,
the cord runs towards the floor.
Plug the power plug into the wall socket in the right direction so that
- Failing to do so may result in electric shock or fire.
- Unplug the power plug and clean it with a dry cloth.
plug terminals and contact points using a dry cloth on a regular basis.
Remove all foreign substances such as dust or water from the power
shock or fire.
the product's specifications. Failing to do so may result in electric
- Make sure that the power voltage, frequency and current match
fire.
- Do not use an electric transformer. lt may result in electric shock or
or extending the power cord may result in electric shock or fire.
- Sharing a wall socket with another appliance, using a power strip,
extension cord.
amps or higher. Use the socket for this washer only. Do not use an
•
Plug the power cord into an AC 120V/60Hz wall socket rated at 15