MIDEA Top Load Impeller - Manual (Page 26)

1.
2.
3.
4. Load about 6 pounds (2.7 kg) of laundry into the tub.
Press the
Power button to turn on your washer.
Turn the cycle selector to select the Rinse & Spin cycle.
Press the Start Pause button to start the test cycle. Your washer should
not rock or vibrate excessively when water fills the tub or when washing
or spinning. The washer should drain well during the spin cycle.
Run a test cycle to make sure that your washer is properly installed.
Caution
•
•
Run a test cycle
26
If you detect any water leaks while the washer is filling or draining,
check the water connections. See
Connect the water hoses on page 19
or Connect the drain hose on page 21.
If the washer rocks and/or vibrates excessively, level it again. See
Level your washer on page 24.
Safety
Instructions
Features
Operation
Requirements
Installation Instructions
Washer Use
Washer Care
Tro
ub
le
sh
oo
tin
g