Sharp PN-60TW3 - Manual (Page 30)

30
E
Menu Items
Menu item details
The menu will differ depending on the input mode.
n SCREEN
You can move the menu screen display position each time DISPLAY is pressed.
AUTO (D-SUB1[RGB]/D-SUB2/Direct Drawing/Wireless)
The CLOCK, PHASE, H-POS, and V-POS are automatically adjusted.
Pressing
ENTER performs adjustment. Use this automatic adjustment when you use the D-SUB1[RGB] or D-SUB2 to display a
computer screen for the first time or when you change the setting of the computer. (See page 40.)
CLOCK (D-SUB1[RGB]/D-SUB2/Direct Drawing/Wireless)
Adjusts frequency for sampling clock for applicable video.
Adjust when there is flickering in the form of vertical stripes.
When using the adjustment pattern (see page 40), make adjustments so that no vertical stripe noise appears in it.
PHASE (D-SUB1[RGB]/D-SUB2/Direct Drawing/Wireless)
Adjusts sampling clock phase for applicable video. Useful when small characters appear with low contrast and/or there are
flickers at corners. When using the adjustment pattern (see page 40), make adjustments so that no horizontal stripe noise
appears in it.
* Adjustments to PHASE should be made only after CLOCK has been correctly set.
H-POS
Adjust the horizontal position of the image.
V-POS
Adjust the vertical position of the image.
H-SIZE
Adjust the horizontal size of the image.
V-SIZE
Adjust the vertical size of the image.
RESOLUTION SETTING (D-SUB1[RGB]/D-SUB2/Direct Drawing/Wireless)
H-RESOLUTION
Sets proper horizontal resolution when the resolution of input signals is not recognized properly.
(Adjustment may be impossible with some signals.)
V-RESOLUTION
Sets proper vertical resolution when the resolution of input signals is not recognized properly.
(Adjustment may be impossible with some signals.)
RESET
Resets the values of the SCREEN menu items to the factory preset values.
Select “ON” and then press ENTER .