Sharp PN-60TW3 - Manual (Page 29)

29
E
Menu Items
Displaying the menu screen
Video and audio adjustment and settings of various functions
are enabled. This section describes how to use the menu
items. See pages 30 to 37 for details of each menu items.
Caution
• Do not turn the main power switch off while the menu items
are being displayed. Doing so may initialize the settings.
n Example of operation
(Adjusting CONTRAST in the PICTURE menu)
1. Press
MENU
to display the menu screen.
1 9 2 0 x 1 0 8 0 V: 60 Hz H: 67.5 kHz
SCREEN
PICTURE
AUDIO
SETUP
MONITOR
PIP/PbyP
OTHERS
AUTO
CLOCK
PHASE
H-POS
V-POS
H-SIZE
V-SIZE
RESOLUTION SETTING
RESET
600
25
610
37
50
50
SCREEN D-SUB1[RGB]
OK···[ENTER] BACK···[RETURN]
2. Press or to select PICTURE, and press ENTER .
3. Press or to select CONTRAST.
BRIGHT
CONTRAST
BLACK LEVEL
TINT
COLORS
SHARPNESS
COLOR ADJUSTMENT
ADVANCED
RESET
31
30
30
30
30
12
SCREEN
PICTURE
AUDIO
SETUP
MONITOR
PIP/PbyP
OTHERS
PICTURE
BACK···[RETURN] MOVE OSD···[DISPLAY]
1 9 2 0 x 1 0 8 0 V: 60 Hz H: 67.5 kHz
D-SUB1[RGB]
4. Press or to adjust the setting.
BRIGHT
CONTRAST
BLACK LEVEL
TINT
COLORS
SHARPNESS
COLOR ADJUSTMENT
ADVANCED
RESET
31
40
30
30
30
12
SCREEN
PICTURE
AUDIO
SETUP
MONITOR
PIP/PbyP
OTHERS
PICTURE
BACK···[RETURN] MOVE OSD···[DISPLAY]
1 9 2 0 x 1 0 8 0 V: 60 Hz H: 67.5 kHz
D-SUB1[RGB]
For items that have , press ENTER , make settings and
then press RETURN .
5. Press
MENU
to close the menu screen.
TIPS
• The menu will differ depending on the input mode.
• The menu screen will close automatically if no operation is
performed for about 15 seconds. (DATE/TIME SETTING,
SCHEDULE and LAN SETUP screens will close in about 4
minutes.)
n Menu screen display
BRIGHT
CONTRAST
BLACK LEVEL
TINT
COLORS
SHARPNESS
COLOR ADJUSTMENT
ADVANCED
RESET
31
30
30
30
30
12
SCREEN
PICTURE
AUDIO
SETUP
MONITOR
PIP/PbyP
OTHERS
PICTURE
BACK···[RETURN] MOVE OSD···[DISPLAY]
1 9 2 0 x 1 0 8 0 V: 60 Hz H: 67.5 kHz
D-SUB1[RGB]
1 2 3
4
1 Name of the menu
2 Input mode
3 An item being selected (highlighted)
4 Screen resolution of input signal, and other data.
TIPS
• Items that cannot be selected appear in gray.
(e.g. Function not supported by the current input signal)