Eiki PJNET-300 - Manual (Page 47)

47
OWNER'S MANUAL
ENGLISH
Setting up the projector
Click Setting on the main menu. This function is to set up the projector.
Select the sub menu [Screen setting] or [Setting] and then set up each
setting.
Item Description
Screen ............... Switches the screen mode. (Full, Zoom, Normal,
Natural wide, True) There may not be available
mode depending on the input mode as shown in
the table below.
Ceiling ................ Sets the image top/bottom and left/right reversed.
(ON, OFF)
Rear ................... Sets the image left/right reversed. (ON, OFF)
Setting up the projector
Input source
Screen mode Video Computer
Full
✔ ✔
Zoom ✔ *
Normal ✔ ✔
Natural wide ✔ *
True * ✔
✐ The mark " ✔ " means that the available screen mode in the
selected input source system. The error message appears
when selecting the disabled screen mode indicated with "*".