Eagle Electronics IntelliMap 480 User Manual
Page 114
108
5. If you're looking by name, there are two options: a. You can spell
out the name in the top selection box. Press
↑ or ↓ to change the first
letter, then press
→ to move the cursor to the next letter and repeat
until the name is correct, then press
ENT
|
ENT
. B. Or you can jump
down to the lower selection list by pressing
ENT
, then press
↓ or ↑ to
select a waypoint from the list, then press
ENT
. The waypoint informa-
tion screen appears.
Find By Name menu, left. Waypoint Information screen, center. At right,
the found waypoint is highlighted by the cursor on the Map Page.
a. To navigate to the waypoint, press
ENT
. (Go To Waypoint command
is already highlighted.) The unit will show navigation information to
the waypoint.
B. To find the waypoint, press
↓ to
F
IND
O
N
M
AP
|
ENT
. The Map Page
appears with the cursor highlighting the found waypoint.