Yamaha Reface YC - Manual (Page 15)

9 reface CS/DX/CP/YC Owner’s Manual
Turning On and Off
 Disabling the Auto Power-
Off function
q Ensure that the instrument is turned off.
w While holding down the leftmost key on the
keyboard, turn on the instrument.
 reface CS, reface CP, and reface
YC
Multiple lamps on the front panel will flash.
 reface DX
The message “Auto power off disabled” will
be displayed on-screen.
e When the lamps stop flashing or the message
is no longer displayed, remove your finger
from the keyboard.
 reface DX:
The Auto Power-Off function can also be dis-
abled by using the [FUNCTION] button.
q Select the System Settings screen by pressing
the [FUNCTION] button.
w Tap the leftmost switch in the DATA ENTRY
section.
The “ON” setting for the “AUTO P.OFF”
parameter at the left of the screen will change
to “off.”
 Enabling the Auto Power-
Off function
To enable the Auto Power-Off function after it
has been disabled, do a Factory Reset. For
details, refer to “Restoring the Factory Default
Settings (Factory Reset)” (page 40).
 reface DX:
The Auto Power-Off function can also be
enabled by using the [FUNCTION] button.
q Select the System Settings screen by pressing
the [FUNCTION] button.
w Tap the left-most switch in the DATA
ENTRY section.
The “off” setting for the “AUTO P.OFF”
parameter at the left of the screen will change
to “ON.”
Leftmost key