Parrot Bebop Drone - Manual (Page 23)

23 Settings
situated under the Parrot Bebop Drone is for stabilization only.
Press Photo mode or Video mode to select video or photo mode.
Note: The video mode is activated by default.
Press DNG (high resolution photos) or JPEG to select a photo format.
To activate burst mode:
1. Press Timelapse mode .
2. Slide your finger on the circle to select the interval between each photo. If you
select 10'', the Parrot Bebop Drone will take a picture every 10 seconds.
Note: When the Parrot Bebop Drone is set in timelapse mode, it is not possible to
record a video.
Note: When the DNG option is activated, the timelapse mode enables the Parrot
Bebop Drone to take a picture every 10 seconds minimum. When the JPEG option is
activated, the timelapse mode enables the Parrot Bebop Drone to take a picture
every 8 seconds minimum.
Flight
Select the Flight settings screen.
Activate the Hull button when the hull protections are installed.
Press Calibrate when the Parrot Bebop Drone does not stay on course correctly.
To set the speed:
·
Use the Max vertical speed option to define a maximum speed when you fly the
Parrot Bebop Drone upwards.
·
Use the Max rotation speed option to define a maximum speed when you make the
Parrot Bebop Drone rotate.
When you fly the Parrot Bebop Drone horizontally, its speed depends on the angle of
inclination.
Note: The hull protections slow the Parrot Bebop Drone down when you fly it outdoor.
Network
Product name
Select the Network settings screen.