Parrot Bebop Drone - Manual (Page 13)

13 Flying
2. Press .
GPS signal
Note: If you are in an area with no GPS reception, the Parrot Bebop Drone position
will not be detected.
The icon indicates that the Parrot Bebop Drone position is detected.
The icon indicates that the Parrot Bebop Drone position is not detected.
Make sure the Parrot Bebop Drone position is detected before taking off to register
the starting point correctly.
To display the last GPS position of the Parrot Bebop Drone:
1. Launch FreeFlight 3.
2. On the main screen, press , then, Settings .
3. Press See details .
> The latitude and longitude of the Parrot Bebop Drone position appears in the
list.
Take off
1. Place the Parrot Bebop Drone on a flat and dry surface and in a unobstructed and
lit area.
2. Press Take Off .
> The Parrot Bebop Drone takes off and hovers at approximately 1 m above the
ground.
Movements
Note: Movements depend on the flight and piloting settings. See the Settings section
for further information. The following description is valid when the Normal option is
activated and Joypad inverted option is deactivated (default configuration).