Inserting a waypoint on a connecting line, Changing the altitude of a waypoint – Parrot Bebop 2 User Manual
Page 71
67
Inserting a waypoint on a connecting line
1. Tap and hold the connecting line at the point where you want to insert the waypoint.
> A list of options appears.
2. Tap
INSERT
.
> A waypoint appears on the connecting line.
The altitude of the inserted point will be the average of the other two points.
Changing the altitude of a waypoint
The altitude is shown in the middle of the waypoint (in meters). The default altitude of a
waypoint is 3 metres above the ground. The maximum altitude of a waypoint is 150 meters.
NB: The higher the waypoint is, the redder it becomes. The lower the waypoint is, the greener
it becomes.