Sony CMT-X3CD - Manual (Page 9)

9 GB
Ge
tt
ing
s
ta
rte
d
Preparing the
Remote
Insert an R6 (size AA) battery (not supplied),
matching the polarities as shown below.
Notes on using the remote
 With normal use, the battery should last for
about six months.
 If you do not use the remote for a long period of
time, remove the battery to avoid damage from
battery leakage and corrosion.
Setting the clock
1
Press
/  to turn on the
system.
2
Press TIMER MENU
.
If setting the clock for the first time,
proceed to step 4.
3
Press
/  to select “CLOCK,”
then press
.
4
Press
/  to set the hour,
then press
.
5
Press
/  to set the minutes,
then press
.
Complete the clock setting.
Note
 The clock settings are reset when you
disconnect the power cord or if a power failure
occurs.
To display the clock when the
system is off
Press DISPLAY
 to display the clock. The
clock is displayed for about 8 seconds.