BenQ TH670s - Manual (Page 53)

Operation 53
FUNCTION DESCRIPTION
Picture Mode
Pre-defined picture modes are provided so you can optimize your
projector image set-up to suit your program type. See "Selecting
a picture mode" on page 36 for details.
User Mode
Management
Selects a picture mode that best suits your need for the image
quality and further fine-tune the image based on the selections
listed on the same page below. See "Setting the User 1/User 2
mode" on page 36 for details.
This function is only available when User 1 or User 2 is
selected.
Brightness
Adjusts the brightness of the image. See "Adjusting Brightness"
on page 38 for details.
Contrast
Adjusts the degree of difference between dark and light in the
image. See "Adjusting Contrast" on page 38 for details.
Color
Adjusts the color saturation level -- the amount of each color in a
video image. See "Adjusting Color" on page 38 for details.
Tint
Adjusts the red and green color tones of the image. See
"Adjusting Tint" on page 38 for details.
Sharpness
Adjusts the image to make it look sharper or softer. See
"Adjusting Sharpness" on page 38 for details.
Color
Temperature
See "Selecting a Color Temperature" on page 39 for details.
Lamp Power
See "Setting Lamp Power" on page 61 for details.
Advanced...
Black Level
See "Setting Black Level" on page 39 for details.
Gamma Selection
See "Selecting a Gamma Selection" on page 39 for details.
Brilliant Color
See "Adjusting Brilliant Color" on page 39 for details.
Color Temperature Fine Tuning
See "Setting a preferred color temperature" on page 40 for details.
Color Management
See
"Color Management" on page 40 for details.
Noise Reduction
See "Reducing Noise Reduction" on page 41 for details.
Film Mode
See "Selecting a Film Mode" on page 41 for details.
Reset Current
Picture Mode
See "Resetting current picture mode" on page 37 for details.
Ad
va
nced
men
u
: Pi
ctur
e