ProSoft Technology RLX-IFH9E-A - Manual (Page 23)

RLX-IFHE ♦ RadioLinx Industrial Wireless Start Here
RadioLinx® Industrial Frequency Hopping Ethernet Radios User Manual
ProSoft Technology, Inc. Page 23 of 109
November 19, 2013
1.6 Configuring the Radios
Configuration of your RLX-IFHE radios consists of the following steps:
 Start ControlScape FH (page 23)
 Plug In the Cables (page 38)
 Set Up the Network (page 24)
 Set Up the Master Radio (page 35)
 Add Remote Radios (page 40)
 Add Repeaters (page 41)
 Graphically Define the RF link (page 43)
 Save the Network Configuration (page 45)
 Save the Radio Configuration (page 39)
1.6.1 Start ControlScape FH
You will use an application (software program) called ControlScape FH to
configure the RLX-IFHE radios and the radio network. If you have not already
installed ControlScape FH, please do so now. Refer to Install ControlScape FH
Configuration Software (page 18) for information on how to install the program.
To start ControlScape
1 Click the Start button, and then choose Programs
2 In the Programs menu, navigate to the ProSoft Technology folder, and then
choose RadioLinx ControlScape FH.
3 Allow a few moments for the program to load. When the program has finished
loading, you will see a screen like this: