ProSoft Technology RLX-IFH9E-A - Manual (Page 17)

RLX-IFHE ♦ RadioLinx Industrial Wireless Start Here
RadioLinx® Industrial Frequency Hopping Ethernet Radios User Manual
ProSoft Technology, Inc. Page 17 of 109
November 19, 2013
1.3 System Requirements
The following system requirements are the recommended minimum
specifications to successfully install and run ControlScape FH:
 Microsoft Windows compatible PC
 Windows 2000 with Service Pack 2 or higher, or Windows XP Professional
with Service Pack 2 or higher, or Windows 2003.
 300 mHz Pentium processor (or equivalent)
 128 megabytes of RAM
 20 megabytes of free disk space
 Ethernet hub with standard RJ45 Ethernet cable
or
Ethernet port with RJ45 crossover cable for direct connection to module
In addition, you will need
 A connection to an existing wired or wireless Ethernet network, with a Static
or Dynamic IP address for your computer
 Static IP address, Subnet Mask and Gateway address for each RadioLinx
device you plan to install. Obtain this information from your system
administrator.