ProSoft Technology ILX800-SMSG - Manual (Page 9)

ILX800-SMSG ♦ Micro800 Platform Contents
SMS Text Plug-in Module for GSM Networks User Manual
ProSoft Technology, Inc. Page 9 of 41
June 18, 2014
1.3 System Requirements
The ILX800-SMSG plug-in module requires the following minimum hardware and software
components:
 Rockwell Automation
® Micro820, Micro830, or Micro850 controller, with compatible
power supply
 Rockwell Automation Connected Components Workbench programming software
version 1.01 or higher
 Rockwell Automation RSLinx communication software version 2.57 or higher
 ILX800-SMSG sample controller program (download at www.prosoft-technology.com)
1.4 Installing the SIM Card
1 Turn the ILX800-SMSG plug-in module over so that the circuit board is facing up.
2 Orient the plug-in module so that the backplane connector is toward the top. Locate the
SIM card holder in the middle of the board.
3 Unlock the SIM card holder's clip by sliding it to the right.
4 Lift the card holder clip and place the SIM card in the card holder, matching the rounded
corner of the card with that of the card holder.