ProSoft Technology 3170-MBS - Manual (Page 17)

3170-MBS ♦ Flex Platform Module Configuration and Installation
Modbus Slave Interface Module User Manual
ProSoft Technology, Inc. Page 17 of 55
October 27, 2010
3.4 Setting the switches
The adapter switches are located under a flip-open cover on the front of the
adapter Set the switches as shown below.
1 Lift the hinged switch cover on the front of the adapter to expose the
switches.
2 Set the switches as shown below.
3 Cycle power to the adapter after setting the switches.
Baud Rate S1-1 S1-2 S1-3
1200 OFF OFF OFF
2400 ON OFF OFF
4800 OFF ON OFF
9600 ON ON OFF
19200 OFF OFF ON
38400 ON OFF ON
62.5K OFF ON ON
Undefined(Defaults to 19200) ON ON ON
Stop Bit S1-4
1 OFF
2 ON
Parity S1-5 S1-6
None OFF OFF
Odd ON OFF
Even OFF ON
Data Bits S1-7
8 OFF
7 ON
Modbus Mode S1-8
RTU OFF
ASCII ON