ProSoft Technology PC56-OPC - Manual (Page 22)

PC56 ♦ ControlLogix Platform Reference
In-Rack Industrial PC User Manual
Page 22 of 34
ProSoft Technology, Inc.
November 18, 2009
6.2.1 RS-232 Configuration/Debug Port
This port is physically an RJ45 connection. An RJ45 to DB-9 adapter cable is
included with the module. This port permits a PC based terminal emulation
program to view configuration and status data in the module and to control the
module. The cable for communications on this port is shown in the following
diagram:
6.2.2 RS-232 Application Port(s)
When the RS-232 interface is selected, the use of hardware handshaking
(control and monitoring of modem signal lines) is user definable. If no hardware
handshaking will be used, the cable to connect to the port is as shown below: