ProSoft Technology PC56-OPC - Manual (Page 15)

Installing PC56 PC56 ♦ ControlLogix Platform
User Manual In-Rack Industrial PC
ProSoft Technology, Inc.
Page 15 of 34
November 18, 2009
3 Installing PC56
In This Chapter
™ Setting Jumpers ....................................................................................15
™ Inserting The Module.............................................................................16
Review the locations of the communications ports. Use the illustration on the
front door of the module to locate the communication ports. Review the drawings
included in this chapter to locate the jumpers that must be checked and, or
changed as your application requires.
Important: Before you install PC56:
ƒ Turn off power to the chassis
ƒ Look at the three jumper settings:
o COM1 port mode setting
o
Battery Enable/CMOS Clear
o
ControlLogix ® Backplane shared memory allocation
3.1 Setting Jumpers
There are three jumpers to set, as your application requires.
3.1.1 Battery Enable/ CMOS Clear