ProSoft Technology MVI69-PDPMV1 - Manual (Page 155)

MVI69-PDPMV1 ♦ CompactLogix or MicroLogix Platform Diagnostics and Troubleshooting
PROFIBUS DPV1 Master User Manual
ProSoft Technology, Inc. Page 155 of 225
July 8, 2011
5.6 Standard PROFIBUS Slave Diagnostic Bytes
The diagnostic information consists of 6 bytes of standard diagnostic information
plus any user-related diagnostic information. The standard information is shown
in the tables below.
Byte Description
0 Station status 1
1 Station status 2
2 Station status 3
3 Master address
4 Ident number high
5 Ident number low
5.6.1 Byte 0 - Station Status 1 Bits
Bit Description
0 Station not existent
1 Station not ready
2 Configuration fault
3 Extended diagnostic data present
4 Not supported
5 Invalid slave response
6 Parameter fault
7 Master lock
5.6.2 Byte 1 - Station Status 2 Bits
Bit Description
0 Parameter request
1 Static diagnostic
2 Slave device
3 Watchdog on
4 Freeze mode
5 Sync mode
6 Reserved
7 Slave deactivated