ProSoft Technology MVI69E-MBTCP - Manual (Page 84)

Using Controller Tags MVI69E-MBTCP ♦ CompactLogix Platform
User Manual Modbus TCP/IP Enhanced Communication Module
Page 84 of 150 ProSoft Technology, Inc.
May 20, 2015
MBTCP.CONTROL.Time
This array allows the processor to get or set module time.
Tag Name Range Description
MBTCP.CONTROL.Time.SetTime 0 or 1 Sends the PLC time to the module
0 = Disable, 1 = Enable
MBTCP.CONTROL.Time.GetTime 0 or 1 Retrieves the time from the module to PLC
0 = Disable, 1 = Enable
MBTCP.CONTROL.Time.Year 0 to 9999 Four digit year value. Example: 2014
MBTCP.CONTROL.Time.Month 1 to 12 Month
MBTCP.CONTROL.Time.Day 1 to 31 Day
MBTCP.CONTROL.Time.Hour 0 to 23 Hour
MBTCP.CONTROL.Time.Minute 0 to 59 Minute
MBTCP.CONTROL.Time.Second 0 to 59 Second
MBTCP.CONTROL.Time.Milliseconds 0 to 999 Millisecond
MBTCP.CONTROL.Time.Error 0 or -1 0 = OK
-1 = Error present
MBTCP.CONTROL.ClientServerControl
This array allows the control and retrieval of driver command active bits.
Tag Name Range Description
MBTCP.CONTROL.ClientServerControl.
Trigger 0 or 1 Toggle client/server control
0 = Disable, 1 = Enable
MBTCP.CONTROL.ClientServerControl.
ActiveServer 0 or 1 Server active state:
0 = Disable, 1 = Enable
MBTCP.CONTROL.ClientServerControl.
ActiveClient_0to15 Client 0 to 15 bit map for active status of clients
MBTCP.CONTROL.ClientServerControl.
ActiveClient_16to19 Client 16 to 19 bit map for active status of
clients
MBTCP.CONTROL.ClientServerControl.
ActiveClientCmd[x] 0 or 1 Client 0 to 19 command active bits. One word
for each client. Each bit is a command.
0 = Disable, 1 = Enable
MBTCP.CONTROL.ClientServerControl.
GetStatus 0 or 1 Toggle request for status
0 = Disable, 1 = Enable
MBTCP.CONTROL.ClientServerControl.
ServerStatus 0 or 1 Server active state
0 = Disabled, 1 = Enabled
MBTCP.CONTROL.ClientServerControl.
Client_0to15Status Client 0 to 15 bit map for active status of clients
MBTCP.CONTROL.ClientServerControl.
Client_16to19Status Client 16 to 19 bit map for active status of
clients
MBTCP.CONTROL.ClientServerControl.
ClientCmdStatus[x] 0 or 1 Clients 0 to 19 command active bits. One word
for each client. Each bit is a command.
0 = Disabled, 1 = Enabled