ProSoft Technology MVI69E-MBTCP - Manual (Page 82)

Using Controller Tags MVI69E-MBTCP ♦ CompactLogix Platform
User Manual Modbus TCP/IP Enhanced Communication Module
Page 82 of 150 ProSoft Technology, Inc.
May 20, 2015
MBTCP.CONTROL.EventCommand_PLCData
This array allows the processor to dynamically build Modbus commands with
PLC processor data. This feature is meant for periodic execution such as
resetting the clock and zeroing-out counters.
Tag Name Range Description
MBTCP.CONTROL.EventCommand
_PLCData.Trigger 0 or 1 Toggle to send Event Command.
0 = Disable, 1 = Enable
MBTCP.CONTROL.EventCommand
_PLCData.ClientID 0 to 19 Client ID associated with the command to be
executed
MBTCP.CONTROL.EventCommand
_PLCData.ServerIPaddress xxx.xxx.xx
x.xxx IP address of target Modbus server
MBTCP.CONTROL.EventCommand
_PLCData.ServicePort 502 or
2000 Service port of target Modbus server
MBTCP.CONTROL.EventCommand
_PLCData.SlaveAddress 1 to 255 Slave address of target Modbus TCP/IP to serial
device, for backwards compatibility
MBTCP.CONTROL.EventCommand
_PLCData.ModbusFunctionCode 1,2,3,4,5,6
,15,16 Specifies the Modbus function to be executed
by the command.
MBTCP.CONTROL.EventCommand
_PLCData.DeviceDBAddress 0 to 9999 Specifies the register or digital point address
offset within the Modbus server device. The
MBTCP client reads or writes from/to this
address within the server.
MBTCP.CONTROL.EventCommand
_PLCData.PointCount 1 to 125
(words)
or
1 to 800
(coils) Specifies the number of registers or digital
points to be associated with the command.
Modbus Function Codes 5 and 6 ignore this field
as they only apply to a single data point.
MBTCP.CONTROL.EventCommand
_PLCData.Data Data values associated with the command
MBTCP.CONTROL.EventCommand
_PLCData.ErrorStatus Command status after execution