Hardware installation, 1 removing the chassis cover, 2 the hard disk installation – PLANET UMG-1000 User Manual

Page 5

Text mode
Original mode

3. Hardware Installation

3.1 Removing the Chassis Cover

The screws around the cover are used to secure the cover to the chas sis.

Remove these screws and put them in a safe place for later use.

Slide the cover backward then remove it from the chassis.

Caution

Prior to removing the chassis cover, make sure the unit’s power is
off and disconnected from the power sources to prevent electric
shock or system damage.

3.2 The Hard Disk Installation

The 2.5” SATA HDD is necessary for system operating. Please install at least 80G
HDD before system configurations.

Remove the drive bay from the chassis.