PLANET UMG-1000 - Manual (Page 14)

14
Step 2: Activating UMG-1000 / UMG-1000W services
The UMG-1000 / UMG-1000W allow the administrator to activate the service on
demand. By default, all services are inactive. The administrator can activate the
service in this page by checking the radio box of the corresponding service. The
activated services will start up by using the default configuration after the quick
start. Click the button “Next” to go to step 3.
Item Description
PBX Enable or disable the IP PBX service.
PPTP VPN Enable or disable the PPTP VPN service.
Email Enable or disable the Email service.
Network Storage Enable or disable the network storage service.
Internet Domain
Name Specify a valid Internet domain for the email server if the
email service is enabled.
Step 3: Setting up the Internet Connection
This page allows the administrator to quickly setup the WAN connection. To setup
the Internet connection, you should be awarded of what method you are using
to connect to the Internet. All technical information should be provided by your
Internet Service Provider (ISP). The ISP type should be one of the followings:
static, DHCP, PPPoE or PPTP. Select your ISP type in the drop down menu. Specify
the Internet connection configuration and then click the button “Next” to go to step
4 or click the button “Skip” to skip this step.