beautypg.com

Configure ip address – PLANET ISW-1022M User Manual

Page 8

background image

6. Configure IP address

The ISW Managed Industrial Switch is shipped with default IP address as following.

IP Address : 192.168.0.100
 Subnet Mask : 255.255.255.0

To check the current IP address or modify a new IP address for the Managed
Industrial Switch, please use the procedures as follow:

¢ Show the current IP address

1. On

“Switch>” prompt, enter “enable” to enter Privileged EXEC mode.

2. On

“Switch#” prompt, enter “show ip”.

3. The screen displays the current IP address, Subnet Mask and Gateway. As show

in Figure 6-1.

Figure 6-1 Show IP information screen

¢ Configure IP address

4. On

“Switch#” prompt, type “configure” to enter the configuration Mode.

See also other documents in the category PLANET Communication: