PLANET KVM-210 - Manual (Page 13)

1
Note
One long sound – Audio auto switch disabled
Three short sound – Audio auto switch enabled
A
Hot Key definition table
Step 1 Step 2 Action
[Scroll] + [Scroll] [1] + [Enter] Switch the active connection to PC 1
[Scroll] + [Scroll] [2] + [Enter] Switch the active connection to PC 2
[Scroll] + [Scroll] [3] + [Enter] Switch the active connection to PC 3
[Scroll] + [Scroll] [4] + [Enter] Switch the active connection to PC 4
[Scroll] + [Scroll] [A] + [Enter]
Disable or enable the Audio auto switch
mode
[Scroll] + [Scroll] [F1] + [Enter] Combined switching (PC+Audio) to PC 1
[Scroll] + [Scroll] [F2]+ [Enter] Combined switching (PC+Audio) to PC 2
[Scroll] + [Scroll] [F3] + [Enter] Combined switching (PC+Audio) to PC 3
[Scroll] + [Scroll] [F4] + [Enter] Combined switching (PC+Audio) to PC 4
[Scroll] + [Scroll] [A] + [1] + [Enter] Single switching the active audio to PC 1
[Scroll] + [Scroll] [A] + [2] + [Enter] Single switching the active audio to PC 2
[Scroll] + [Scroll] [A] + [3] + [Enter] Single switching the active audio to PC 3
[Scroll] + [Scroll] [A] + [4] + [Enter] Single switching the active audio to PC 4
[Scroll] + [Scroll] [B] + [Enter] Disable or enable beeper
[Scroll] + [Scroll] [S] + [Enter] Activate the Auto-Scan mode, default 5 sec.
[Scroll] + [Scroll]
[S] + [5 - 250] +
[Enter] Select the Auto-Scan interval from 5 to 250
Sec.