PLANET IPM-8001 - Manual (Page 5)

Initial IP Power Manager
The following procedure describes the basic steps needed to set up the IPM-
8001/8002:
1. Please insert User’s Manual and Utility CD into the CD-ROM drive to initiate the
autorun program. Once completed a menu screen will appear.
2. Click on “Initial Utility” hyper link to initiate the installation. If the autorun pro-
gram is not process in your PC, you can click the “Start” button and choose
“Run”. (Suppose “E” is your CD-ROM drive). When the dialog box appears, enter
“E:\Utility\Setup.exe” and press enter key. You will see the dialog box as below.
3. Please press “Discover” button to find out your IPM-8001/8002.