Chapter 3 driver installation, 1 installing driver to windows server 2003/2003r2, Chapter 3 – PLANET ENW-9800 User Manual
Page 7: Driver installation
Chapter 3 Driver Installation
A device driver must be installed before your ENW-9801 / ENW-9802 can be used with your computer.
This chapter describes how to install the driver for various operating systems. Before you begin the
driver installation process, make sure you have the installation disks for your computer’s operation
system.
3.1 Installing Driver to Windows Server 2003/2003R2
The following installation uses ENW-9801 and operates under Window2003R2.
The ENW-9802 installation procedure is the same with ENW-9801.
1.
Install ENW-9801 into your PC’s PCI Express slot.
2.
Power on the PC and insert Driver Disk into CD-ROM drive.
3.
Windows 2003R2 will detect ENW-9801 and ask you to install driver. Please select the second
option and click “Next”.
4.
Please select “Include this location in the search” and then click “Browse” to specify
ENW-9801 driver location to install. (Assume "E" is your CD-ROM drive, you can find
ENW-9801 driver in E:\planet_NIC10G\3.23\drivers\ENW-9801\W2003R2). Please click
“Next” to continue.
7