PLANET ENW-9800 - Manual (Page 6)

LED Description
Link Lights to indicate a functional network link through the port.
ACT
Blinks to indicate data has been sending and receiving via the
port.
Table 2-1 Descriptions of ENW-9801 / ENW-9802 LED
2.2 Hardware Installation
Step 1: Please turn off your PC.
Step 2: Remove any metal decorations from your hands and wrists.
Step 3: Remove the cover from your PC.
Step 4: Locate an empty PCI Express slot and remove the corresponding back plate. Save the
screw for use in Step 6.
Step 5: Carefully insert the adapter into the chosen slot and press firmly with proper push to
ensure it is fully seated in the slot.
Step 6: Secure the adapter with the screw you saved in step 4.
Step 7: Replace the PC cover.
Step 8: Power on the PC and refer to next chapter to install the driver of this adapter.
6