beautypg.com

Installing and using vdsl converter, 1 install the ethernet over vdsl converter, 2 lan to lan connection – PLANET VC-100M User Manual

Page 16

background image

16

3. Installing and Using

VDSL Converter

3.1 Install the Ethernet Over VDSL

Converter

The Converter does not require any software configuration.
Users can immediately use any feature of this product simply
by attached the cables and plug power on. There is some
key limitation on the Ethernet over VDSL converter. Please
check the following items:

The device is used for point-to-point connection only

and allows data and voice work on the same telephone
or ISDN lines.

Two RJ-11 connectors for VDSL port. One for voice

device connection (like telephone) and the other one for
network link connection.

Depending on the quality of telephone line, the

maximum distance of one VDSL segment is 1.2km
(4000ft) with AWG 24 telephone wires. The distance
will change by the quality of telephone wires.

3.2 LAN to LAN connection

Two sets of the converters could be used to link two local
Area networks that are located in different areas. Through
the normal telephone line, it could setup a 11Mbps symmetric
backbone, but one converter must be Master(VC-101M) and
the other one is Slave(VC-101S).