PLANET ADW-4100 - Manual (Page 17)

11
Chapter 4
System Configuration
This Chapter details the configurations for ADW-4100
Overview
This chapter describes the setup procedure for:
•
WAN Access
•
LAN configuration
PCs on your local LAN may also require configuration. For details, see Chapter 5 -
PC Configuration.
WAN configuration
Select the WAN link under Configuration column to set up WAN connection. It is
required to know the type of Internet connection service used by your ISP.
Note: You only need to fill in the fields that your ISP provided, and leave the others
as default.
Figure 4-1: WAN Configuration
Per VC Setting
Under Per VC Setting, it provides the configurations for IP address, subnet mask,
gateway, and VPI/VCI, where VPI and VCI must be filled.
4