PLANET VIP GW - Manual (Page 10)

10
LAN/WAN Interface quick configurations
Nature of PLANET VIP-GW is an IP Sharing (NAT) device, it comes with two default
IP addresses, and default LAN side IP address is “192.168.0.1”, default WAN side
IP address is “172.16.0.1”. You may use any PC to connect to the LAN port of
VIP-GW to start machine administration.
Hint
In general cases, the LAN IP address is the default gateway of LAN
side workstations for Internet access, and the WAN IP of VIP-GW
are the IP address for remote calling party to connect with.
LAN IP address configuration via web configuration interface
Execute your web browser, and insert the IP address (default: 192.168.0.1) of VIP
in the adddress bar. After logging on machine with username/password (default:
admin / 123), browse to “Advance Setup” --> “LAN setting” configuration
menu:
Parameter Description
IP address
LAN IP address of VIP-GW
Default: 192.168.0.1
Subnet Mask
LAN IP address of VIP-GW
Default: 255.255.255.0
Hint
It is suggested to keep the DHCP server related parameters in
default state to keep machine in best performance.
After confirming the modification you’ve done, Please click on the “Apply”
button to macke the changes effective, and click “Save Configuration” to save
configuration.