PLANET IPX-300 User Manual

Page 73

The IP address
of IP PBX

Figure D-6. SIP settings of VIP-192

Then browse to “SIP Account Settings” configuration menu and fill in the account/password

information. The sample configuration screen is shown below:

Data match with Figure D-3. IP
PBX’s extension settings

Figure D-7. SIP account settings of VIP-192

STEP 6:

After both of devices have registered to IP PBX successfully, it could browse to “Information ->

PBX Extension Status” page to show the registration status:

Figure D-8. Extension status

Test the Scenario:

1. VIP-154T pick up the telephone

2. Dial the number: 100 (VIP-192) shall be able to connect to the VIP-192

3. Then the VIP-192 should ring. Please repeat the same dialing steps on VIP-192 to

establish the first voice communication from VIP-154T