PLANET IPX-300 - Manual (Page 55)

55
¾ WAN
WAN
Enable/Disable
The WAN IP port packet filter function, control a network IP port,
default setting is Enable.
Enable
Enable/Disable the Internet to WAN IP source port rules, default
setting is Disable.
Source IP
This is the filter WAN IP address. Example: 209.131.36.158
Dest. Port This is the port used for source IP service.
Protocol
This Protocol Used for the source IP service. Select either TCP or
UDP.
Block Wan IP Port Block time setting. Select Always or By Schedule.
Day
Block Day setting, select a All / Mon-Sat./ Mon-Fri./Mon./ Tues./
Wed./Thu./Fri./Sat./Sun.
Time Block Time setting, select time range is 00:00 to 23:59.
Table 4-13. Packet filter-WAN description
¾ LAN
LAN
Enable/Disable
Internet to LAN filter function, default setting is Enable. A
prohibitive rule set should only allow the necessary
Internet/DMZ services to LAN (Local Area Network) clients.
Enable
Enable/Disable the WAN IP source port rules, default setting
is Disable.
Source IP
This is the filter source IP address to LAN.
Dest. Port This is the port used for source IP.
Protocol
This Protocol Used for the WAN Filter service. Select either
TCP or UDP.
Day
Block Day setting, select All / Mon-Sat./ Mon-Fri./Mon./
Tues./ Wed./Thu./Fri./Sat./Sun.
Time Block Time setting, select time range is 00:00 to 23:59
Table 4-14. Packet filter-LAN description
¾ MAC
MAC
Enable/Disable
Form internet MAC filter function, default setting is Enable.
Block
Wan IP Port Block time Setting. Select Always or By
Schedule.