PLANET IPX-300 - Manual (Page 59)

website
Table 4-19. DDNS description
SNTP
The simple network management protocol (SNMP) forms part of the internet protocol suite as defined
by the Internet Engineering Task Force (IETF). SNMP is used by network management systems to
monitor network-attached devices for conditions that warrant administrative attention. It consists of a
set of standards for network management, including an Application Layer protocol, a dIP-PBXbase
schema, and a set of dIP-PBX objects.
.
Figure 4-34. SNMP settings
Enable
Enable/Disable the SNMP service, default setting is Disable.
(Support SNMP version 1 or SNMP version 2c).
SNMP Read Community
SNMP Read Community string so that EPICenter can
retrieve information.(default :public)
SNMP Write Community
Specifies the name of the SNMP write community to which
the printer device that this actual destination represents
belongs.(Default:private)
SNMP Trap Host
Defines an SNMP trap host to which AppCelera will send
trap messages. (Default address is empty)
SNMP Trap Community
The SNMP trap community name. The community name
functions as a password for sending trap notifications to the
target SNMP manager. (Default: public).
Table 4-20. SNMP description
59