PLANET IPX-1900 - Manual (Page 36)

¾ Add New Hunt Group
Step 1. Press “Add” button to add a new Group Name information.
Figure 3-44. Add an new Group Name
Step 2. Fill in the required information in Hunt Group Setup page.
Figure 3-45. Hunt Group setup
Group Name
Input your group name
Hunt Mode
There are 3 modes available: Round Robin / Ring All /
Random Mode.
1. Round Robin: Take turns ringing each available
Extension / Users
2. Ring All: Ring all Extension/Users, until any one
Extension / Users answer the call.
3. Random: Ring random group inside Extension / Users
Incoming Call Dial Number
Associate a dial number with a call group voice instruction to
instruct incoming calls (e.g. If “20” is associated with Group
A, when the caller dial “20”, all extensions under Group A will
ring). Default incoming call dial number is empty.
Ring (Group/Extension)
Timeout
Setup a timeframe to control the call group hunting timeout.
Default setting is 30 sec.
Table 3-26. Hunt Group description
¾ To add extension/users to Ring group
Step 1.Select your extension
36