PLANET IPX-1900 - Manual (Page 11)

In order to connect machine for administration, please
Í
Note
locate your PC in the same network segment (192.168.0.x)
of IP PBX. If you’re not familiar with TCP/IP, please refer
to related chapter on user’s manual CD or consult your
network administrator for proper network configurations.
Network Interface quick configurations
Wizard is a tool to quickly setup IP PBX.
After pass the authentication, please click for quick IPX PBX setup.
For most users, Internet access is the primary application. The IP PBX supports the WAN interface for
Internet access and remote access. The following sections will explain more details of WAN Port
Internet access and broadband access setup. When you click “Wizard Setup “the following setup page
will be show.
Figure 2-2. Wizard-Operating Mode settings
¾ Step1. Wan Type
WAN Setting
Static - IP
If you are a leased line user with a fixed IP address, fill out the
following items with the information provided by your ISP.
DHCP – Cable Modem
This function will be automatically configured when plugged into
the cable modem. If there is a Domain Name Server (DNS) that
you would input to use.
PPPoE - ADSL
Some ISP's provide DSL-based service and use PPPoE to
establish communication link with end-users. If you are connected
to the Internet through a DSL line, check with your ISP to see if
they use PPPoE. If they do, you need to select this item.
Table 2-1. WAN description of IP PBX
11