PLANET IPX-1500 - Manual (Page 53)

53
Parameter Description
Group
CO Line in IPX-1500 can be divided up to 10 different groups for different
telephony service
Answer Mode
(Operation Mode)
Each CO line can operate in one of the following modes.
Shutdown:
This line is totally disabled – usually used for unconnected CO ports.
Dial In Only:
This line can only be used to receive calls.
Dial Out Only:
This line can only be used to make calls.
Two-Way:
This line can be used to both receive and make calls.
Direct Ring (Ring Through):
This line is two-way, but incoming calls on this line will be transferred to the
Ring Through Extension (see below) directly, bypassing the system’s auto
attendant.
Voicemail (Ring Through Voicemail):
This line is two-way, but incoming calls on this line will be transferred to the
voicemail box for the Ring Through Extension directly, bypassing the system’s
auto attendant.
Operator Voicemail Enable operator voicemail if the operator fails to answer the call.
Caller ID
IPX-1500 supports the following three caller ID types: FSK, DTMF before ring,
DTMF after ring. Please check with your local phone company to find out
which type is used in your area. The caller ID information will be passed
through to the extension if Caller ID Pass Through function is enabled (please
refer to “PBX config”).
Disconnect Force the CO line disconnected
DONE
Clicking on the DONE button to apply the changes.
Extension line configuration
Please clicking Extension line telephone icon to enter into Ext xxx configuration: