Handling precaution – Avago Technologies ASMT-FG10-NFJ00 User Manual
Page 5

Handling Precaution
This product is classified as moisture sensitive level 3
When the bag is opened, the parts are required to be mounted within 168 hours in factory conditions of ± 30°C/60%,
and stored at <10% RH.
The devices are required to bake, before mounting, if:
a) The humidity indicator card is >10% when read at 23°C (±5°C)
b) The pack has been opened for more than 168 hours.
Baking is recommended at: 60°C (±5°C) for 20 hours.
Note:
1) Do not stack the units after reflow.
2) This part is Class 1 ESD sensitive. Observe appropriate precautions during handling and processing. Refer to Application Note AN-1142 for
additional details.
For product information and a complete list of distributors, please go to our web site:
www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Limited in the United States and other countries.
Data subject to change. Copyright © 007 Avago Technologies Limited. All rights reserved.
AV0-077EN - May 11, 007