Avago Technologies LSI SAS 31601E User Manual
Quick installation guide
Table of contents
Document Outline
- CONTENTS OF THE LSI DEVICE DRIVERS AND UTILITIES CD
- QUICK HBA INSTALLATION
- Step1 Unpack the HBA in a static-free environment.
- Step2 Prepare the computer.
- Step3 Insert the SAS31601E in an available PCIExpress slot.
- Step4 Secure the bracket to the system chassis.
- Step5 Connect the SAS hard disk drives (HDDs) to the SAS connectors on the HBA.
- Step6 Replace the cover and the power cords. Turn on the power to the system.
- WINDOWS DRIVER INSTALLATION
- Step1 Using another computer, copy the appropriate driver files supplied on the LSI Serial Attac...
- Step2 Boot the computer from the Windows CD-ROM.
- Step3 Shortly after the Windows Setup begins, press F6 when the words Setup is inspecting your c...
- Step4 Follow the instructions until a screen displaying the words Setup could not determine the ...
- Step5 Choose S to specify additional devices.
- Step6 Follow the prompts and insert the Windows driver diskette when you are prompted to insert ...
- Step7 Follow the Windows installation procedure to complete the installation. Microsoft provides...
- LINUX DRIVER INSTALLATION
- TECHNICAL SUPPORT
- SAS31601E PCI Express to 3.0-Gb/s Serial Attached SCSI (SAS) Host Bus Adapter