Hardware specifications – Avago Technologies MegaRAID SCSI 320-2E User Manual
Page 2
DB11-000056-00, Version 1.0, October 2004
Find a list of LSI Logic Corporation’s U.S. distributors, international distributors,
sales offices, and design resource centers on the LSI Logic web site at:
®
LSI Logic, the LSI Logic logo design, and MegaRAID are trademarks or registered
trademarks of LSI Logic Corporation. All other brand and product names may be
trademarks of their respective companies.
Copyright © 2004 by LSI Logic Corporation. All rights reserved.
LSI Logic Corporation reserves the right to make changes to any products and ser-
vices herein at any time without notice. LSI Logic does not assume any responsi-
bility or liability arising out of the application or use of any product or service
described herein, except as expressly agreed to in writing by LSI Logic; nor does
the purchase, lease, or use of a product or service from LSI Logic convey a license
under any patent rights, copyrights, trademark rights, or any other of the intellec-
tual property rights of LSI Logic or of third parties.
Step 5
Press the iTBBU memory module firmly into the
memory socket.
As you press the memory module into the socket,
the iTBBU clicks into place, indicating proper
seating in the socket, and the arms on the socket
fit into the notches to hold the memory module
securely.
Step 6
If necessary, install the MegaRAID 320-2E
controller in the PCI-Express slot in the computer
as shown in the following figure. Replace the
computer cover and reattach the power cord(s).
Press down gently, but firmly, to ensure that the
card is properly seated in the slot. The bottom
edge of the controller card must be flush with the
slot. Attach the board to the computer chassis
with the bracket screw.
If your board has a memory module, never apply
pressure to the module when inserting the
adapter. Applying pressure could break the
module.
H A R D W A R E S P E C I F I C A T I O N S
The iTBBU and memory module hardware specifications are
listed in the table below.
Press
Here
Press
Here
!
CAUTION
Item
Description
Socket Type
DIMM for ECC SDRAM
Module Support
DDR 1
Cache Memory Size Supported
128 Mbytes
Memory Bus Speed
333 MHz
Memory Bus Width
64-bit or larger
Retention Time
72 hours for 128 Mbyte
standard memory
Error Correcting Capability (ECC) Supported
Battery Type
NiMH