Avago Technologies SAS 9300-16e Host Bus Adapter - Manual (Page 6)

LSI Corporation
- 6 -
LSI SAS 9300-16e PCI Express to 12Gb/s SAS Host Bus Adapter User Guide
May 2013 LSI SAS 9300-16e HBA Characteristics
Electrical Characteristics
Figure 1 LSI SAS 9300-16e HBA Board Layout
 EC1 – PCIe x8 board edge connector
 CR3, CR4 – Heartbeat LEDs
 J5 – Auxiliary power connector
 J6, J7 – SFF-8644 mini-SAS HD, external, right-angle connectors
5.5 Electrical Characteristics
The maximum power requirements for the LSI SAS 9300-16e HBA under normal operation are as follows:
 PCIe 12.0 V = 2.35 A
 PCIe 3.3 V = 0.13 A
 Passive cable, nominal = 28.6 W
5.6 Thermal and Atmospheric Limits
The atmospheric limits for the LSI 12Gb/s SAS HBA are as follows:
 Temperature range: 0 °C to 55 °C (32 °F to 131 °F) (dry bulb)
 Relative humidity range: 5% to 90% noncondensing
 Maximum dew point temperature: 32 °C (89.6 °F)
 Minimum airflow for the LSI SAS 9300-16e HBA:
— 220 LFPM at 35 °C inlet temperature
— 270 LFPM at 45 °C inlet temperature
— 350 LFPM at 55 °C inlet temperature
The following limits define the storage and transit environment for the LSI 12Gb/s SAS HBA:
 Temperature range: –45 °C to +105 °C (–49 °F to +221 °F) (dry bulb)
 Relative humidity range: 5% to 90% noncondensing
%# ?
0ORT
*
0ORT
0ORT
*
0ORT
*
,3)
,3)
#2
#2