Driver installation, Technical support, Warranty notice – Avago Technologies SAS 9201-16i Host Bus Adapter User Manual
Page 2
TECHNICAL SUPPORT
For assistance installing, configuring, or
running the LSI SAS 9201-16i HBA, contact LSI
Technical Support:
WARRANTY NOTICE
1.
The warranty does not cover the return
of parts damaged by changing the bracket.
2.
The warranty does not cover ESD
damage to the HBA. HBAs returned without a
bracket mounted on the board will be
returned without return merchandise
authorization (RMA) processing.
E-mail:
Web Site:
www.lsi.com/support/
Avago Technologies, the A logo, LSI, and Storage by LSI are trademarks of Avago Technologies in the United States and/or other countries. All
other brand and product names may be trademarks of their respective companies.
Corporate Headquarters
Website
San Jose, CA
www.lsi.com
Document Number: 47212-01A
Copyright © 2014 Avago Technologies
All Rights Reserved. October 2014.
6.
Connect SAS cables between the HBA and the SAS backplane that contains any other
SATA or SAS devices. The LSISAS9201-16i has four internal x4 mini-SAS connectors, each
connecting to four 6Gb/s SAS ports. Use the appropriate cable to connect the HBA to SAS or SATA
storage devices.
For connection to internal drives or backplanes, use an internal cable with a standard mini-SAS
connector (SFF-8087) on the controller side of the cable. The other end of the cable may fan out
into four SAS-style cables for direct connection to SAS or SATA disk drives. The previous figure
shows the connector locations on the LSISAS9201-16i and the use of a controller-based, fan-out
cable to connect to drives that require a SAS-style signal connector.
7.
Replace the cover and any power cords, and power up the system. Replace the chassis’s
cover, reconnect any power cords, and reconnect any network cables. Turn on the power.
The hardware installation of your LSI 6Gb/s SAS HBA is complete. The next procedure is to install
the appropriate operating system drivers.
DRIVER INSTALLATION
All driver installation instructions are available at
. Select 6Gb/s SAS HBAs >
Product Name > Software Downloads.