Avago Technologies MegaRAID SAS 9270-8i - Manual (Page 3)

LSI Corporation
- 3 -
MegaRAID SAS 9270-8i RAID Controller Quick Installation Guide
June 2012 MegaRAID SAS 9270-8i RAID Controller Quick Installation Guide
MegaRAID SAS 9270-8i RAID Controller Quick Installation Guide
Thank you for purchasing the LSI™ MegaRAID
®
6Gb/s SAS 9270-8i RAID controller. Your MegaRAID controller provides
reliability, high performance, and fault-tolerant drive subsystem management. Before you install your RAID controller,
please take a few minutes to read this quick installation guide. If you need more information about any topic covered
in this guide, refer to the related documents on your MegaRAID Universal Software Suite CD.
1 Product Overview
The MegaRAID SAS 9270-8i RAID controller is a PCI-Express 3.0, low-profile RAID controller that offers a 6 Gb/s transfer
rate. It controls eight internal SAS/SATA ports through two SFF-8087 mini SAS 4i internal connectors.
The MegaRAID SAS 9270-8i RAID controller has a 1-GB non-volatile DDR3 1333MT/s transportable memory module.
The TMM02 unit connects remotely to the LSI intelligent Battery Backup Unit 09 (LSIiBBU09). For more information
about the LSIiBBU09 unit, refer to the MegaRAID LSIiBBU09 Intelligent Battery Backup Unit Quick Installation Guide on
the MegaRAID Universal Software Suite CD.
The following figure shows the MegaRAID SAS 9270-8i RAID controller.
Figure 1 MegaRAID SAS 9270-8i RAID Controller
NOTE Record your controller serial number in a safe location in case you need to contact LSI.